Accessories
Dilution dispenser
Use to dispense dilution liquid into empty vials.
Use syringe filter to ensure sterility
Replace the syringe filter on the dilution dispenser at the start of each day
Item numbers
You can purchase the dilution dispenser directly from Hirschmann.
In SBT's own DD01, we cut the tubing to fit and assemble the various parts for you. This avoids common mistakes.
Tubing kit
Connects a vial to BactoBox®.
See Install tubing kit for installation instructions.
Always use an external filter
Always place an external filter between BactoBox® and the tubing kit. Connect the external filter to the inlet (white connector).
The external filter protects your BactoBox® setup against clogging.
Breakdown
O
External filter with 40 µm cut-off. The external filter is a separate item!
P
Inlet luer lock connector (white)
Q
Outlet luer lock connector (black)
R
Tubing cap
Versions
Several versions of Tubing kit exist. Make sure to use the latest.
Item numbers
Not recommended.
Vial rack
Holds up to five vials at a time.
Item numbers
Any standard laboratory rack works as well.
SBT's RA01 features a 45° angle that makes it easier to use with BactoBox®.
Power supply
Power supply for BactoBox®. Supplied with each BactoBox®. Not for individual sale.
Output: 12 V⎓ / 2500 mA / 30 W
Avoid third-party power supplies
Flow cell cover
Cover for flow cell compartment of BactoBox®. Supplied with each BactoBox®. Not for individual sale.
Always have the flow cell cover in place
The flow cell cover protects the flow cell compartment against dust and liquid.
Inlet-outlet cover
Cover for inlet and outlet of BactoBox®. Supplied with each BactoBox®. Not for individual sale.
Use the inlet-outlet cover when you disconnect the tubing kit
The inlet-outlet cover protects the flow paths against dust and liquid.
Last updated
Was this helpful?