Assemble dilution dispenser

This pages show you how to assemble a dilution dispenser.

Quick clip ⚡

Get things ready

You need these items:

• 1 × diluent (A) Shipped in a separate cardboard box.

• 1 × dilution dispenser package that includes:

  • Dispenser head (B)

  • Suction tube (C)

  • Recirculation tube (D)

  • Ejection unit (E) Includes Luer lock attachment

  • 5 L adapter ring (F) This is already mounted to the dispenser head (B) by SBT.

• 1 × syringe filter (G) Bundled in a separate box (SF01) that contains 40 pieces.

From left to right: Dilution dispenser package, dilution liquid, and syringe filter package (SF01).

Do not use a long, sharp knife to open the box with diluent

The knife may accidentally cut all the way through the foam padding and into the container with dilution liquid.

Step by step

1

Assemble ejection unit

Insert the ejection unit (E) into the ejection valve on the dispenser head (B).

Then, turn the union nut clockwise until it is firmly in place.

2

Assemble suction tube on dispenser valve

Slightly pull back the union nut from the suction tube (C) as shown n the image below.

Push the suction tube in until the plastic collar reaches the stop.

Turn the union nut clockwise to tighten onto the valve mantle.

3

Install recirculation tube

Insert the small recirculation tube (D) firmly into the designated hole on the dispenser head (B).

Ensure that the nozzle faces away from the suction tube (C).

4

Install syringe filter

Screw the syringe filter (G) onto the Luer lock adapter of the ejection unit (E).

5

That is it!

You are now ready to make a DIY dilution vial.

Consult the included Hirschmann manual for comprehensive details on operation, safety, and troubleshooting.