Clean

Quick clip ⚡

Get things ready

You need these items:

• 1 × BactoBox® setup

• 1 × disinfection vial

Step by step

1

Use disinfection vial

Place a disinfection vial in the vial rack. Transfer the tubing kit to the disinfection vial.

You can use the same disinfection multiple times. We recommend at most 10 times.

The disinfection vial contains flammable liquid

The disinfection vial contains 70% denatured alcohol, which makes it both flammable and an eye irritant. Keep away from heat, sparks, open flames, and hot surfaces. Avoid contact with eyes.

Refer to the Material Safety Data Sheet (MSDS) for more information.

2

Press the Clean button

Press the Clean button to clean the BactoBox® setup.

Press the Clean button

The display shows a countdown that tells you when the Clean program is done.

Countdown on the Cleaning screen.

3

That is it!

After approximately 1 minute the Clean program is done. You end back up on the Home screen.

When to clean

Clean your BactoBox® in these cases:

• After each measurement.

• After a deep clean.

• After 30+ minutes of inactivity. The BactoBox® software automatically prompts you to do this.

See Maintenance for more information.