Power on

All steps from the initial assembly to software boot

Quick clip ⚡

Step by step

1

Assemble power supply

Slide the socket adapter onto the power supply until you hear a distinct click. Plug the power supply into a wall socket.

2

Insert power cable

Firmly insert the round plug into the power port on the right side of BactoBox®.

Ensure it is fully inserted to avoid unexpected restarts.

3

Power on

Flip the rocker switch to the On position. The green LED 🟢 next the rocker switch lights up immediately. Wait 2–3 min for BactoBox® to start.

4

That is it!

You should now see the home screen.

There may be messages on the home screen. E.g., "Insert flow cell", "Clean the device" or "Perform a QC test". This is completely normal.

PreviousInstallationNextInstall tubing kit

Last updated

Was this helpful?