> For the complete documentation index, see [llms.txt](https://help.sbtinstruments.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.sbtinstruments.com/mpd/workflows/best-medium/protocol.md).

# Protocol

The steps, materials and settings we used to screen the growth media.

This is what we did, step by step, with the materials and settings we used in both studies.

## Study 1: four media

### What we used

<figure><img src="https://142487182-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FseAjVXi9YrPNSfdp1OXS%2Fuploads%2FS4jWcCTGLeMvnm1BsTb7%2Fget_things_ready_cropped.JPG?alt=media&#x26;token=4a61316c-b893-45b3-9861-a8d15153a46c" alt="Kit for the experiment"><figcaption><p>The items we used for each round of measurements.</p></figcaption></figure>

* *E. coli* from one starter culture.
* Four media: Terrific broth, LB, TSB and Bacto™ CD Supreme Fermentation Production Medium (CD) with 10 mL/L glycerol. We prepared each medium as its supplier recommends.
* One shake flask per medium, for example 50 mL medium in a 250 mL flask.
* BactoBox® with a flow cell that had at least 10 measurements left, and a computer with Access.
* A photometer for OD<sub>600</sub>.
* Dilution vials, ready to use or filled with the dilution dispenser.
* Disinfection vials.
* 5 mL centrifuge tubes and a rack for 5 mL and 15 mL tubes.
* Vortex mixer.
* P1000 and P200 pipettes with sterile tips.
* Serological pipettes, preferably 2 mL, and a pipette controller.
* Marker.

It took 35 hours from inoculation to the last sample. Hands-on time was about 2 hours.

{% stepper %}
{% step %}

### Inoculation

We inoculated one flask of each medium from the same *E. coli* starter culture. We noted the time. We sampled each flask 22, 28 and 35 hours later, when the cultures were on the plateau.
{% endstep %}

{% step %}

### Measurement group

We connected BactoBox® to a computer and opened Access.

We clicked <kbd>Measurement group</kbd> in the menu, then <kbd>Create measurement group</kbd>. We filled in the details, chose the type *Basic* and clicked <kbd>Create</kbd>. We opened the new group with the open icon. See [Create and open measurement groups](https://help.sbtinstruments.com/more/software/create-and-open-measurement-groups.md).

{% hint style="info" %}
If you are new to Access, see [Do measurements in Access](https://help.sbtinstruments.com/everyday-use/do-measurements-in-access.md).
{% endhint %}
{% endstep %}

{% step %}

### Sampling

At 22 hours, we used a serological pipette to take 1 mL culture from the first flask. We transferred it to a 5 mL centrifuge tube. We noted the time.
{% endstep %}

{% step %}

### Cell dispersion

We vortexed the tube for 1 min at maximum speed.

{% hint style="info" %}
If your strain forms clumps or chains, see [Break up cell clumps](https://help.sbtinstruments.com/more/how-to-guides/break-up-cell-clumps.md).
{% endhint %}
{% endstep %}

{% step %}

### Dilution series

1. We transferred 101 µL of the sample to 10 mL diluent. We vortexed for 10 s at maximum speed. This gave 1:100.
2. We transferred 101 µL of the 1:100 dilution to 10 mL diluent. We vortexed for 10 s at maximum speed. This gave 1:10 000.

We expected 1 × 10^10 to 5 × 10^10 cells/mL on the plateau. A 1:10 000 dilution brings that into the working range of BactoBox®.

{% hint style="info" %}
If you work with other organisms, see [Hit the right concentration](https://help.sbtinstruments.com/more/how-to-guides/hit-the-right-concentration.md).
{% endhint %}

<figure><img src="https://142487182-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FseAjVXi9YrPNSfdp1OXS%2Fuploads%2F3K0zqcF480QTk5Kk9Elf%2FOptiseeding_-7_workup_1%3B10000.avif?alt=media&#x26;token=f8ffaef4-1831-4dc0-b5fe-699684685794" alt="Sample workup to a 1:10 000 dilution"><figcaption><p>The sample workup for a 1:10 000 dilution.</p></figcaption></figure>
{% endstep %}

{% step %}

### Measurement

We moved the tubing kit to the 1:10 000 vial. In Access, we filled in these fields:

* *Dilution*: 10 000.
* *Label*: the medium, for example LB or TSB. We used the same label at every time point.
* *Sampled at*: the time we took the sample. The clock icon next to the field sets it to now.

We pressed <kbd>Measure</kbd>. Access calculated the concentration in the flask and showed it in *Cells/mL × Dil*.

We also measured OD<sub>600</sub> on each sample with the photometer.
{% endstep %}

{% step %}

### Repeats

We repeated the steps from *Sampling* to *Measurement* for the other three media. Then we repeated the whole round at 28 and 35 hours. We ended with one measurement per medium at each time point.
{% endstep %}
{% endstepper %}

### Analysis

The count held on the plateau, so we treated the three time points as replicates for each medium.

1. In the measurement group, we clicked <kbd>Export CSV</kbd>. We opened the file in a spreadsheet and saved it as .xlsx.
2. For each medium, we calculated the mean and standard deviation of the three time points. In Excel, we used `=AVERAGE()` and `=STDEV.S()`.
3. We calculated the coefficient of variation (CV) as the standard deviation divided by the mean.
4. We ranked the media by their mean cells/mL.
5. We plotted cells/mL and OD<sub>600</sub> at 28 hours side by side in bar charts, to compare the two rankings.

<div data-with-frame="true"><figure><img src="https://142487182-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FseAjVXi9YrPNSfdp1OXS%2Fuploads%2FLFr1s3gI2oDlgfh35s9T%2FAccess_to_Excel.png?alt=media&#x26;token=ee66c9c9-0868-4930-9df3-ffc5bad5545e" alt="Access data exported to a spreadsheet"><figcaption><p>Data exported from Access as a CSV file and opened in a spreadsheet.</p></figcaption></figure></div>

{% hint style="info" %}
Check three things before you trust the ranking:

* A count that rises from the first time point to the later ones means some samples came before the plateau.
* A CV above 20 % means some samples came before the plateau, or the sample workup varied a lot.
* Overlapping error bars mean the media reach a similar maximum cell count.

If the result is unclear, repeat the experiment with three measurements per time point. Three flasks per medium is better still.
{% endhint %}

## Study 2: glycerol levels in a defined medium

### What we used

* *E. coli* ATCC 8739, with the inoculum grown in LB medium.
* Bacto™ CD Supreme Fermentation Production Medium, with glycerol added as carbon source.
* Three 250 mL baffled Erlenmeyer flasks with vented caps, with 50 mL medium in each, one per glycerol level.
* BactoBox® for cells/mL and CIZE.
* A photometer for OD<sub>600</sub>.

{% stepper %}
{% step %}

### Setup

We added glycerol to the CD medium at 4, 7 and 10 mL/L. The maker of the medium recommends 4–10 mL/L, so 7 mL/L is the center point. We filled 50 mL into each flask.

We inoculated each flask to 1 × 10^7 cells/mL with *E. coli* ATCC 8739 grown in LB medium.
{% endstep %}

{% step %}

### Sampling

We sampled each culture through its growth curve. We measured each sample once with BactoBox® and once with OD<sub>600</sub>. In Access, we set *Sampled at* to the time the sample left the flask.

For BactoBox®, we dispersed cells (vortex) before the first dilution. Then we diluted the sample into the working range.

{% hint style="info" %}
To pick the dilution, see [Hit the right concentration](https://help.sbtinstruments.com/more/how-to-guides/hit-the-right-concentration.md).
{% endhint %}
{% endstep %}
{% endstepper %}

### Analysis

We plotted cells/mL, OD<sub>600</sub> and CIZE against time for each glycerol level.

Questions about your own process? [Contact us](https://sbtinstruments.com/contact).


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.sbtinstruments.com/mpd/workflows/best-medium/protocol.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
