> For the complete documentation index, see [llms.txt](https://help.sbtinstruments.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.sbtinstruments.com/troubleshooting/not-in-the-new-structure/errors-about-conductivity/conductivity-too-high.md).

# Conductivity too high

## Introduction

The high conductivity errors (error 1201 and 1205) typically occur when your sample vial is not diluted enough. These errors may also result from an incorrect composition of the diluent.

## Step by step

{% stepper %}
{% step %}

#### Check if the diluent has the right conductivity

Ensure that the diluent has a conductivity of 1850 ± 50 µS/cm. Use the [Measure conductivity with BactoBox®](/advanced/advanced-sample-preparation/hit-the-right-conductivity/measure-conductivity-with-bactobox-r.md) to check whether this is the case.

When ambient temperatures exceed 25°C, consider using higher sample dilutions. Alternatively, [make a custom diluent](/advanced/advanced-sample-preparation/hit-the-right-conductivity/make-diluent.md) with reduced PBS. Ensure the diluent is sterile-filtered on the day of use.
{% endstep %}

{% step %}

#### Check if the bacterial sample has been appropriately diluted

Some cultivation media have very high conductivity and it is necessary to dilute more than 1:100. Transfer 50 µL of sample to 10 mL of diluent, to get a 1:201 dilution. Usually this will bring the conductivity within the acceptable range. See the section [Hit the right concentration](/advanced/advanced-sample-preparation/hit-the-right-concentration.md) for more information on dilution factors.
{% endstep %}
{% endstepper %}

## Tried all of the above

Did you try all of the above and nothing helped?

This is a hardware issue with your BactoBox® setup. [Contact our support team](broken://pages/l8Gc9LJGCvsSLOjzDNGF) to discuss the matter further. Make sure to mention it if you found:

* A leak inside the flow cell compartment
* Sign of corrosion or deterioration inside the flow cell department
* Broken or loose inlet/outlet (where you connect the tubing kit to your BactoBox®)
* Rattling or loose components
* In general, hardware damage of any kind

If possible, include pictures of the problem. This helps us help you faster!


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.sbtinstruments.com/troubleshooting/not-in-the-new-structure/errors-about-conductivity/conductivity-too-high.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.